'Standard boring' is not a spec — it is a hope. These four numbers make it one.
The pattern numbers
Cup Ø35 mm, depth ~12.5; bore distance (cup edge to door edge) typically 3–6 mm depending on hinge and overlay; screw holes at 45/9.5 for machine-insert hinges. State all of it or state the hinge model — either fully defines the CNC program.
Setouts and counts
Top and bottom hinges usually centre 90–110 mm from door ends; add a third hinge past ~1,200 mm height, a fourth past ~2,000 or on heavy gloss tall doors. We default to weight-rated counts unless your schedule overrides.
Special cases
Push-latch doors bore the same but check reduced-crank hinges; bifolds and corner solutions need their hardware named. Glass-frame doors get boring in the frame stile — confirm stile width fits your cup distance.